JL Audio 10TW3-D4
2x4Ω
2x8ΩSubwoofer
| Nominal diameter | 10″ / 250 mm |
| Resonance | 32.3 Hz |
| Q factor | 0.62 |
| Sensitivity | 82.1 dB |
| Linear excursion | ± 15.2 mm |
| Program Power | 800 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 82.1dB
Thiele & Small parameters
- Resonance frequency (free air) fS 32.3Hz
- Mechanical quality factor QMS 11.35
- Electrical quality factor QES 0.66
- Total quality factor QTS 0.62
Large signal parameters
- Maximum linear excursion (one way) xmax 15.2mm
- Air volume displaced at xmax VD 555cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 2 x 4Ω
- DC resistance (in series) RE 9.0Ω
- Inductance (1kHz, in series, estimated) LE 7.51mH
Magnet
- Force factor (in series) Bl 25.4N/A
- Motor constant Bl/√RE 8.45N/√W
- Diameter 130mm
Diaphragm
- Effective diameter 216mm
- Effective area SD 365cm²
- Moving mass MMS 231g
- Moving mass (without air load) MMD 226g
Suspensions
- Stiffness KMS 9.52N/mm
- Compliance CMS 105µm/N
- Equivalent volume to the compliance VAS 19.8L
- Mechanical resistance RMS 4.13N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 267mm
- Baffle cutout diameter 244mm
- Mounting depth 83mm
- Volume occupied by the driver 0.54L
- Net weight 4.6kg
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.png.webp)
.png.webp)
.webp.webp)