LaVoce CPF082.00K
8Ω
Coaxial
| Nominal diameter | 8″ / 200 mm |
| Resonance | 93 Hz |
| Q factor | 0.46 |
| Sensitivity | 93.5 dB |
| Linear excursion | ± 3.3 mm |
| Program power | 400 W |
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.5dB
- Frequency response 90 - 20000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 93Hz
- Mechanical quality factor QMS 4.07
- Electrical quality factor QES 0.52
- Total quality factor QTS 0.46
Large signal parameters
- Maximum linear excursion (one way) xmax 3.3mm
- Maximum excursion before damage xlim 7.3mm
- Air volume displaced at xmax VD 73cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.9Ω
- Inductance (1kHz) LE 0.43mH
- VC Diameter 51mm
- Winding height HVC 10.7mm
- Winding material EdgeWound CCA
- Former material Glass fiber
Magnet
- Flux density B 1T
- Force factor Bl 10.9N/A
- Motor constant Bl/√RE 4.49N/√W
- Air gap height HAG 8mm
- Diameter 140mm
- Height 22mm
- Material Ferrite
Diaphragm
- Effective diameter 167mm
- Effective area SD 220cm²
- Moving mass (including air load) MMS 18.1g
- Moving mass MMD 16.5g
- Material Water proof treated paper
Suspensions
- Stiffness KMS 6.41N/mm
- Compliance CMS 162µm/N
- Equivalent volume to the compliance VAS 11.1L
- Mechanical resistance RMS 1.92N·s/m
- Surround material Polycotton
Dimensions
- Nominal diameter 8″
- 200mm
- Volume occupied by the driver 1.1L
- Net weight 2.9kg
- Frame material ABS
.png)
.png)
Export this driver to a box design software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.png.webp)
.png.webp)
.jpg.webp)