MONACOR MSH-115
Mid-range
4″ / 115 mm
Nominal diameter
85 Hz
Resonance
0.43
Q factor
87 dB
Sensitivity
± 1.5 mm
Linear excursion
120 W
Program Power
![MONACOR MSH-115 Mid-range](/MONACOR/MSH-115/MONACOR_MSH-115_(Photo).jpg)
- Sensitivity (1W, 1m, infinite baffle)
- SPL1W
- 86.5
- dB
- Frequency response
- 85 - 10000
- Hz
- Resonance frequency (free air)
- fS
- 85.0
- Hz
- Mechanical quality factor
- QMS
- 1.98
- Electrical quality factor
- QES
- 0.55
- Total quality factor
- QTS
- 0.43
- Maximum linear excursion
- xmax
- 1.5
- mm
- Air volume displaced at xmax
- VD
- 8.3
- cm³
- Power handling
- P
- 50
- W
- Program power
- Pmax
- 120
- W
- Nominal impedance
- Z
- 8
- Ω
- DC resistance
- RE
- 6.3
- Ω
- Inductance (1kHz)
- LE
- 0.3
- mH
- VC Diameter
- 25
- mm
- Winding material
- Aluminium
- Force factor
- Bl
- 4.8
- N/A
- Motor constant
- Bl/√RE
- 1.91
- N/√W
- Diameter
- 72
- mm
- Weight
- 0.23
- kg
- Effective diameter
- 84
- mm
- Effective area
- SD
- 55
- cm²
- Moving mass
- MMS
- 4.5
- g
- Moving mass (without air load)
- MMD
- 4.2
- g
- Stiffness
- KMS
- 1.25
- N/mm
- Compliance
- CMS
- 800
- µm/N
- Equivalent volume to the compliance
- VAS
- 4
- L
- Mechanical resistance
- RMS
- 1.21
- N·s/m
- Nominal diameter
- 4
- ″
- 115 x 115
- mm
- Overall size
- 115 x 115
- mm
- Baffle cutout diameter
- 101
- mm
- Overall depth
- 55
- mm
- Flange thickness
- 0
- mm
- Mounting depth
- 55
- mm
- Volume occupied by the driver (estimated)
- 0.16
- L
- Net weight
- 0.56
- kg
Thiele & Small parameters
Large signal parameters
Voice Coil
Magnet
Diaphragm
Suspensions
Dimensions
![MONACOR MSH-115 SPL & Impedance](/MONACOR/MSH-115/MONACOR_MSH-115_(Frequency_response_+_Impedance).png)
![MONACOR MSH-115 Dimensions](/MONACOR/MSH-115/MONACOR_MSH-115_(Dimensions).png)
Export this driver to a simulation software:
![WinISD](/images/export/WinISD.png)
![Basta!](/images/export/Basta.png)
![Hornresp](/images/export/Hornresp.png)
![QSpeakers](/images/export/QSpeakers.png)
![SpeakerSim](/images/export/SpeakerSim.png)
![MfbLabs](/images/export/MfbLabs.png)
![Speakerbench](/images/export/Speakerbench.png)