MONACOR SP-250P
Woofer
10″ / 265 mm
Nominal diameter
33 Hz
Resonance
0.33
Q factor
92 dB
Sensitivity
± 3.5 mm
Linear excursion
200 W
Program Power
![MONACOR SP-250P Woofer](/MONACOR/SP-250P/MONACOR_SP-250P_(Photo).jpg)
- Sensitivity (1W, 1m, infinite baffle)
- SPL1W
- 91.7
- dB
- Frequency response
- 33 - 4000
- Hz
- Resonance frequency (free air)
- fS
- 33.0
- Hz
- Mechanical quality factor
- QMS
- 2.33
- Electrical quality factor
- QES
- 0.38
- Total quality factor
- QTS
- 0.33
- Maximum linear excursion
- xmax
- 3.5
- mm
- Air volume displaced at xmax
- VD
- 121
- cm³
- Power handling
- P
- 100
- W
- Program power
- Pmax
- 200
- W
- Nominal impedance
- Z
- 8
- Ω
- DC resistance
- RE
- 6.5
- Ω
- Inductance (1kHz)
- LE
- 1.2
- mH
- VC Diameter
- 50
- mm
- Winding material
- Aluminium
- Force factor
- Bl
- 10.8
- N/A
- Motor constant
- Bl/√RE
- 4.24
- N/√W
- Diameter
- 145
- mm
- Weight
- 1.1
- kg
- Effective diameter
- 210
- mm
- Effective area
- SD
- 346
- cm²
- Moving mass
- MMS
- 33
- g
- Moving mass (without air load)
- MMD
- 28.2
- g
- Stiffness
- KMS
- 1.45
- N/mm
- Compliance
- CMS
- 690
- µm/N
- Equivalent volume to the compliance
- VAS
- 115
- L
- Mechanical resistance
- RMS
- 2.94
- N·s/m
- Nominal diameter
- 10
- ″
- 265
- mm
- Overall diameter
- 265
- mm
- Baffle cutout diameter
- 233
- mm
- Overall depth
- 120
- mm
- Flange thickness
- 9
- mm
- Mounting depth
- 111
- mm
- Volume occupied by the driver (estimated)
- 1.5
- L
- Net weight
- 3.34
- kg
Thiele & Small parameters
Large signal parameters
Voice Coil
Magnet
Diaphragm
Suspensions
Dimensions
![MONACOR SP-250P SPL & Impedance](/MONACOR/SP-250P/MONACOR_SP-250P_(Frequency_response_+_Impedance).png)
![MONACOR SP-250P Dimensions](/MONACOR/SP-250P/MONACOR_SP-250P_(Dimensions).png)
Export this driver to a simulation software:
![WinISD](/images/export/WinISD.png)
![Basta!](/images/export/Basta.png)
![Hornresp](/images/export/Hornresp.png)
![QSpeakers](/images/export/QSpeakers.png)
![SpeakerSim](/images/export/SpeakerSim.png)
![MfbLabs](/images/export/MfbLabs.png)
![Speakerbench](/images/export/Speakerbench.png)