Morel Elite EW 536
6Ω
Woofer
| Nominal diameter | 5″ / 143 mm |
| Resonance | 45 Hz |
| Q factor | 0.22 |
| Sensitivity | 86.9 dB |
| Linear excursion | ± 5.5 mm |
| Program Power | 300 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.9dB
Thiele & Small parameters
- Resonance frequency (free air) fS 45Hz
- Mechanical quality factor QMS 1.16
- Electrical quality factor QES 0.28
- Total quality factor QTS 0.22
Large signal parameters
- Maximum linear excursion (one way) xmax 5.5mm
- Air volume displaced at xmax VD 48cm³
- Power handling P 150W
- Program power Pmax 300W
Voice Coil
- Nominal impedance Z 6Ω
- DC resistance RE 4.5Ω
- Inductance (1kHz) LE 0.38mH
- VC Diameter 75mm
- Winding height HVC 16mm
- Winding material Hexatech™ Aluminum
- Former material Aluminum
Magnet
- Flux density B 1T
- Force factor Bl 7.7N/A
- Motor constant Bl/√RE 3.63N/√W
- Air gap height HAG 5mm
- Material Hybrid™ Neodymium/Ferrite
Diaphragm
- Effective diameter 106mm
- Effective area SD 88cm²
- Moving mass MMS 13g
- Moving mass (without air load) MMD 12.4g
- Material Damped polymer composite
Suspensions
- Stiffness KMS 1.05N/mm
- Compliance CMS 952µm/N
- Equivalent volume to the compliance VAS 10.3L
- Mechanical resistance RMS 3.18N·s/m
Dimensions
- Nominal diameter 5″
- 143mm
- Overall diameter 143mm
- Baffle cutout diameter 121mm
- Overall depth 65mm
- Flange thickness 5mm
- Mounting depth 60mm
- Volume occupied by the driver (estimated) 0.33L
- Net weight 1.12kg
.jpg)
.jpg)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.webp.webp)
.webp.webp)