Morel Titanium TiW 638Nd
4Ω
8Ω
Woofer
Nominal diameter | 6″ / 160 mm |
Resonance | 36 Hz |
Q factor | 0.35 |
Sensitivity | 86.5 dB |
Linear excursion | ± 5.3 mm |
Program Power | 300 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.5dB
Thiele & Small parameters
- Resonance frequency (free air) fS 36Hz
- Mechanical quality factor QMS 3.40
- Electrical quality factor QES 0.39
- Total quality factor QTS 0.35
Large signal parameters
- Maximum linear excursion xmax 5.3mm
- Air volume displaced at xmax VD 63cm³
- Power handling P 150W
- Program power Pmax 300W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.4Ω
- Inductance (1kHz) LE 0.53mH
- VC Diameter 75mm
- Winding height HVC 15.5mm
- Winding material Hexatech™ Aluminum
- Former material Titanium
Magnet
- Flux density B 0.81T
- Force factor Bl 7.7N/A
- Motor constant Bl/√RE 3.31N/√W
- Air gap height HAG 5mm
- Material Hybrid™ Neodymium/Ferrite
Diaphragm
- Effective diameter 123mm
- Effective area SD 119cm²
- Moving mass MMS 17g
- Moving mass (without air load) MMD 16g
- Material Injected damped polymer composite
Suspensions
- Stiffness KMS 0.935N/mm
- Compliance CMS 1070µm/N
- Equivalent volume to the compliance VAS 21L
- Mechanical resistance RMS 1.21N·s/m
Dimensions
- Nominal diameter 6″
- 160mm
- Overall diameter 160mm
- Baffle cutout diameter 140mm
- Overall depth 69mm
- Flange thickness 6mm
- Mounting depth 63mm
- Volume occupied by the driver (estimated) 0.38L
- Net weight 1.2kg
.jpg)
.jpg)
Export this driver to a simulation software:
Closed Box Simulator·





