Morel ULTIMO Ti 802
2Ω
4ΩSubwoofer
| Nominal diameter | 8″ / 222 mm |
| Resonance | 39 Hz |
| Q factor | 0.62 |
| Sensitivity | 82.4 dB |
| Linear excursion | ± 12.5 mm |
| Program Power | 1600 W |
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 82.4dB
- Frequency response 20 - 900Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 39Hz
- Mechanical quality factor QMS 3.88
- Electrical quality factor QES 0.73
- Total quality factor QTS 0.62
Large signal parameters
- Maximum linear excursion (one way) xmax 12.5mm
- Air volume displaced at xmax VD 318cm³
- Power handling P 800W
- Program power Pmax 1600W
Voice Coil
- Nominal impedance Z 2Ω
- DC resistance RE 1.7Ω
- Inductance (1kHz) LE 0.14mH
- VC Diameter 130mm
- Winding height HVC 37mm
- Winding material Hexatech™ Aluminum
- Former material Titanium
Magnet
- Flux density B 0.64T
- Force factor Bl 7.8N/A
- Motor constant Bl/√RE 5.98N/√W
- Air gap height HAG 12mm
- Material Double Magnet Vented
Diaphragm
- Effective diameter 180mm
- Effective area SD 254cm²
- Moving mass MMS 107g
- Moving mass (without air load) MMD 104g
- Material Carbon-fiber laminated paper
Suspensions
- Stiffness KMS 5.26N/mm
- Compliance CMS 190µm/N
- Equivalent volume to the compliance VAS 17L
- Mechanical resistance RMS 5.49N·s/m
Dimensions
- Nominal diameter 8″
- 222mm
- Overall diameter 222mm
- Baffle cutout diameter 200mm
- Mounting depth 120mm
- Volume occupied by the driver 2L
- Net weight 6.1kg
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.jpg.webp)