Morel ULTIMO Ti SC 102
2Ω
4ΩSubwoofer
| Nominal diameter | 10″ / 263 mm |
| Resonance | 27 Hz |
| Q factor | 0.49 |
| Sensitivity | 87.7 dB |
| Linear excursion | ± 9.5 mm |
| Program Power | 1200 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 87.7dB
- Frequency response 10 - 900Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 27Hz
- Mechanical quality factor QMS 4.46
- Electrical quality factor QES 0.55
- Total quality factor QTS 0.49
Large signal parameters
- Maximum linear excursion (one way) xmax 9.5mm
- Air volume displaced at xmax VD 426cm³
- Power handling P 600W
- Program power Pmax 1200W
Voice Coil
- Nominal impedance Z 2Ω
- DC resistance RE 1.3Ω
- Inductance (1kHz) LE 0.34mH
- VC Diameter 130mm
- Winding height HVC 31mm
- Winding material Hexatech™ Aluminum
- Former material Titanium
Magnet
- Flux density B 0.61T
- Force factor Bl 6.93N/A
- Motor constant Bl/√RE 6.08N/√W
- Air gap height HAG 12mm
- Material Double Magnet Vented
Diaphragm
- Effective diameter 239mm
- Effective area SD 448cm²
- Moving mass MMS 102g
- Moving mass (without air load) MMD 95.8g
- Material Carbon fiber laminated paper
Suspensions
- Stiffness KMS 3.23N/mm
- Compliance CMS 310µm/N
- Equivalent volume to the compliance VAS 54L
- Mechanical resistance RMS 3.85N·s/m
Dimensions
- Nominal diameter 10″
- 263mm
- Overall diameter 263mm
- Baffle cutout diameter 225mm
- Mounting depth 143mm
- Volume occupied by the driver 2.34L
- Net weight 6.1kg
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.png.webp)
.jpg.webp)
.jpg.webp)