Morel ULTIMO Ti SC 124
2Ω
4Ω
Subwoofer
12″ / 305 mm
Nominal diameter
26 Hz
Resonance
0.47
Q factor
86 dB
Sensitivity
± 9.5 mm
Linear excursion
1200 W
Program Power
![Morel ULTIMO Ti SC 124 Subwoofer](/Morel/ULTIMO_Ti_SC_124/Morel_ULTIMO_Ti_SC_124_(Photo_1).jpg)
![Morel ULTIMO Ti SC 124 Subwoofer](/Morel/ULTIMO_Ti_SC_124/Morel_ULTIMO_Ti_SC_124_(Photo_2).jpg)
- Amazon.com
- $$$
- Sensitivity (1W, 1m, infinite baffle)
- SPL1W
- 86.3
- dB
- Frequency response
- 10 - 900
- Hz
- Resonance frequency (free air)
- fS
- 26.0
- Hz
- Mechanical quality factor
- QMS
- 5.80
- Electrical quality factor
- QES
- 0.52
- Total quality factor
- QTS
- 0.47
- Maximum linear excursion
- xmax
- 9.5
- mm
- Air volume displaced at xmax
- VD
- 426
- cm³
- Power handling
- P
- 600
- W
- Program power
- Pmax
- 1200
- W
- Nominal impedance
- Z
- 4
- Ω
- DC resistance
- RE
- 3.0
- Ω
- Inductance (1kHz)
- LE
- 1.39
- mH
- VC Diameter
- 130
- mm
- Winding height
- HVC
- 31
- mm
- Winding material
- Hexatech™ Aluminum
- Former material
- Titanium
- Flux density
- B
- 0.61
- T
- Force factor
- Bl
- 10.9
- N/A
- Motor constant
- Bl/√RE
- 6.29
- N/√W
- Air gap height
- HAG
- 12
- mm
- Material
- Double Magnet Vented
- Effective diameter
- 239
- mm
- Effective area
- SD
- 448
- cm²
- Moving mass
- MMS
- 127.8
- g
- Moving mass (without air load)
- MMD
- 120.7
- g
- Material
- Carbon-fiber laminated paper
- Stiffness
- KMS
- 3.33
- N/mm
- Compliance
- CMS
- 300
- µm/N
- Equivalent volume to the compliance
- VAS
- 92.2
- L
- Mechanical resistance
- RMS
- 3.7
- N·s/m
- Nominal diameter
- 12
- ″
- 305
- mm
- Overall diameter
- 305
- mm
- Baffle cutout diameter
- 264
- mm
- Mounting depth
- 152
- mm
- Volume occupied by the driver
- 2.6
- L
- Net weight
- 6.3
- kg
Available on (affiliate link)
Specifications
Thiele & Small parameters
Large signal parameters
Voice Coil
Magnet
Diaphragm
Suspensions
Dimensions
Export this driver to a simulation software:
![WinISD](/images/export/WinISD.png)
![Basta!](/images/export/Basta.png)
![Hornresp](/images/export/Hornresp.png)
![QSpeakers](/images/export/QSpeakers.png)
![SpeakerSim](/images/export/SpeakerSim.png)
![MfbLabs](/images/export/MfbLabs.png)
![Speakerbench](/images/export/Speakerbench.png)