Oberton 10NMB200
8Ω
Mid-range
Nominal diameter | 10″ / 262 mm |
Resonance | 58.7 Hz |
Q factor | 0.32 |
Sensitivity | 94.9 dB |
Linear excursion | ± 4.3 mm |
Program Power | 400 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.9dB
- Frequency response 70 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 58.7Hz
- Mechanical quality factor QMS 8.92
- Electrical quality factor QES 0.33
- Total quality factor QTS 0.32
Large signal parameters
- Maximum linear excursion xmax 4.3mm
- Air volume displaced at xmax VD 135cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.8Ω
- Inductance (1kHz) LE 0.53mH
- VC Diameter 64mm
- Winding height HVC 12.5mm
- Winding material Aluminium
- Former material Kapton
Magnet
- Flux density B 1.15T
- Force factor Bl 14.1N/A
- Motor constant Bl/√RE 5.83N/√W
- Air gap height HAG 8mm
- Material Neodymium
Diaphragm
- Effective diameter 201mm
- Effective area SD 317cm²
- Moving mass MMS 30.2g
- Moving mass (without air load) MMD 25.9g
- Material Paper
Suspensions
- Stiffness KMS 4.1N/mm
- Compliance CMS 244µm/N
- Equivalent volume to the compliance VAS 34.9L
- Mechanical resistance RMS 1.25N·s/m
Dimensions
- Nominal diameter 10″
- 262mm
- Overall diameter 263mm
- Baffle cutout diameter 225mm
- Overall depth 107mm
- Volume occupied by the driver (estimated) 1.1L
- Net weight 2.36kg
- Frame material Die cast aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





