Oberton 12B400
8Ω
Mid Bass
Nominal diameter | 12″ / 310 mm |
Resonance | 50.5 Hz |
Q factor | 0.25 |
Sensitivity | 97.1 dB |
Linear excursion | ± 5.3 mm |
Program Power | 800 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 97.1dB
- Frequency response 50 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 50.5Hz
- Mechanical quality factor QMS 9.69
- Electrical quality factor QES 0.26
- Total quality factor QTS 0.25
Large signal parameters
- Maximum linear excursion xmax 5.3mm
- Air volume displaced at xmax VD 270cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 0.81mH
- VC Diameter 77mm
- Winding height HVC 15mm
- Winding material Aluminium
- Former material Kapton
Magnet
- Flux density B 1.33T
- Force factor Bl 18.4N/A
- Motor constant Bl/√RE 7.81N/√W
- Air gap height HAG 9mm
- Material Ferrite
Diaphragm
- Effective diameter 256mm
- Effective area SD 515cm²
- Moving mass MMS 49.2g
- Moving mass (without air load) MMD 40.8g
- Material Paper
Suspensions
- Stiffness KMS 4.95N/mm
- Compliance CMS 202µm/N
- Equivalent volume to the compliance VAS 74.7L
- Mechanical resistance RMS 1.61N·s/m
Dimensions
- Nominal diameter 12″
- 310mm
- Overall diameter 311mm
- Baffle cutout diameter 280mm
- Overall depth 145mm
- Volume occupied by the driver (estimated) 3L
- Net weight 7.25kg
- Frame material Die cast aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





