Oberton 12NB400
8Ω
Subwoofer
| Nominal diameter | 12″ / 315 mm |
| Resonance | 43.6 Hz |
| Q factor | 0.18 |
| Sensitivity | 96.7 dB |
| Linear excursion | ± 5.3 mm |
| Program Power | 900 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 96.7dB
- Frequency response 50 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 43.6Hz
- Mechanical quality factor QMS 10.39
- Electrical quality factor QES 0.18
- Total quality factor QTS 0.18
Large signal parameters
- Maximum linear excursion xmax 5.3mm
- Air volume displaced at xmax VD 270cm³
- Power handling P 450W
- Program power Pmax 900W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.0Ω
- Inductance (1kHz) LE 0.83mH
- VC Diameter 77mm
- Winding height HVC 15mm
- Winding material Aluminium
- Former material Kapton
Magnet
- Flux density B 1.45T
- Force factor Bl 20.3N/A
- Motor constant Bl/√RE 9.1N/√W
- Air gap height HAG 9mm
- Material Neodymium
Diaphragm
- Effective diameter 256mm
- Effective area SD 515cm²
- Moving mass MMS 59.8g
- Moving mass (without air load) MMD 51.4g
- Material Paper with glassfiber
Suspensions
- Stiffness KMS 5.1N/mm
- Compliance CMS 196µm/N
- Equivalent volume to the compliance VAS 70.5L
- Mechanical resistance RMS 1.58N·s/m
Dimensions
- Nominal diameter 12″
- 315mm
- Overall diameter 315mm
- Baffle cutout diameter 280mm
- Overall depth 180mm
- Volume occupied by the driver (estimated) 2.8L
- Net weight 5.0kg
- Frame material Die Cast Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.png.webp)
.png.webp)