Oberton 15B450
8Ω
Woofer
Nominal diameter | 15″ / 388 mm |
Resonance | 45.1 Hz |
Q factor | 0.29 |
Sensitivity | 97.7 dB |
Linear excursion | ± 6.8 mm |
Program Power | 900 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 97.7dB
- Frequency response 45 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 45.1Hz
- Mechanical quality factor QMS 9.60
- Electrical quality factor QES 0.29
- Total quality factor QTS 0.29
Large signal parameters
- Maximum linear excursion xmax 6.8mm
- Air volume displaced at xmax VD 560cm³
- Power handling P 450W
- Program power Pmax 900W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 1.08mH
- VC Diameter 77mm
- Winding height HVC 18mm
- Winding material Copper
- Former material Glass fiber
Magnet
- Flux density B 1.33T
- Force factor Bl 20.4N/A
- Motor constant Bl/√RE 8.86N/√W
- Air gap height HAG 9mm
- Material Ferrite
Diaphragm
- Effective diameter 325mm
- Effective area SD 830cm²
- Moving mass MMS 81.6g
- Moving mass (without air load) MMD 64.7g
- Material Paper with glassfiber
Suspensions
- Stiffness KMS 6.54N/mm
- Compliance CMS 153µm/N
- Equivalent volume to the compliance VAS 147L
- Mechanical resistance RMS 2.41N·s/m
Dimensions
- Nominal diameter 15″
- 388mm
- Overall diameter 388mm
- Baffle cutout diameter 352mm
- Overall depth 163mm
- Volume occupied by the driver (estimated) 3.8L
- Net weight 7.5kg
- Frame material Die cast aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





