Oberton 15NSW600
8Ω
Woofer
Nominal diameter | 15″ / 388 mm |
Resonance | 36.5 Hz |
Q factor | 0.29 |
Sensitivity | 95.4 dB |
Linear excursion | ± 14.3 mm |
Program Power | 1200 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.4dB
- Frequency response 35 - 1000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 36.5Hz
- Mechanical quality factor QMS 8.44
- Electrical quality factor QES 0.30
- Total quality factor QTS 0.29
Large signal parameters
- Maximum linear excursion xmax 14.3mm
- Air volume displaced at xmax VD 1182cm³
- Power handling P 600W
- Program power Pmax 1200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.9Ω
- Inductance (1kHz) LE 0.8mH
- VC Diameter 77mm
- Winding height HVC 34mm
- Winding material Copper Clad Aluminium
- Former material Glass fiber
Magnet
- Flux density B 1.23T
- Force factor Bl 23.4N/A
- Motor constant Bl/√RE 9.64N/√W
- Air gap height HAG 11mm
- Material Neodymium
Diaphragm
- Effective diameter 325mm
- Effective area SD 830cm²
- Moving mass MMS 123g
- Moving mass (without air load) MMD 106g
- Material Kevlar paper
Suspensions
- Stiffness KMS 6.48N/mm
- Compliance CMS 154µm/N
- Equivalent volume to the compliance VAS 148L
- Mechanical resistance RMS 3.34N·s/m
Dimensions
- Nominal diameter 15″
- 388mm
- Overall diameter 388mm
- Baffle cutout diameter 355mm
- Overall depth 205mm
- Volume occupied by the driver (estimated) 4.3L
- Net weight 7.15kg
- Frame material Die Cast Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





