Oberton 15PD600
8Ω
Subwoofer
Nominal diameter | 15″ / 385 mm |
Resonance | 38.2 Hz |
Q factor | 0.23 |
Sensitivity | 96.5 dB |
Linear excursion | ± 8.5 mm |
Program Power | 1200 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 96.5dB
- Frequency response 38 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 38.2Hz
- Mechanical quality factor QMS 13.41
- Electrical quality factor QES 0.23
- Total quality factor QTS 0.23
Large signal parameters
- Maximum linear excursion xmax 8.5mm
- Air volume displaced at xmax VD 705cm³
- Power handling P 600W
- Program power Pmax 1200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.4Ω
- Inductance (1kHz) LE 1.17mH
- VC Diameter 100mm
- Winding height HVC 22mm
- Winding material Copper
- Former material Glass fiber
Magnet
- Flux density B 1.38T
- Force factor Bl 28.7N/A
- Motor constant Bl/√RE 11.4N/√W
- Air gap height HAG 10mm
- Material Ferrite
Diaphragm
- Effective diameter 325mm
- Effective area SD 830cm²
- Moving mass MMS 125g
- Moving mass (without air load) MMD 108g
- Material Paper with glasfiber
Suspensions
- Stiffness KMS 7.19N/mm
- Compliance CMS 139µm/N
- Equivalent volume to the compliance VAS 133L
- Mechanical resistance RMS 2.24N·s/m
Dimensions
- Nominal diameter 15″
- 385mm
- Overall diameter 388mm
- Baffle cutout diameter 355mm
- Overall depth 181mm
- Volume occupied by the driver (estimated) 5.5L
- Net weight 11.8kg
- Frame material Die cast aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





