Oberton 18NXB1200
8Ω
Subwoofer
Nominal diameter | 18″ / 461 mm |
Resonance | 35.8 Hz |
Q factor | 0.28 |
Sensitivity | 95.7 dB |
Linear excursion | ± 11.5 mm |
Program Power | 2400 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.7dB
- Frequency response 35 - 1000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 35.8Hz
- Mechanical quality factor QMS 9.24
- Electrical quality factor QES 0.29
- Total quality factor QTS 0.28
Large signal parameters
- Maximum linear excursion xmax 11.5mm
- Air volume displaced at xmax VD 1332cm³
- Power handling P 1200W
- Program power Pmax 2400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 1.29mH
- VC Diameter 100mm
- Winding height HVC 31mm
- Winding material Copper
- Former material Glass fiber
Magnet
- Flux density B 1.05T
- Force factor Bl 29.4N/A
- Motor constant Bl/√RE 12.7N/√W
- Air gap height HAG 14mm
- Material Neodymium
Diaphragm
- Effective diameter 384mm
- Effective area SD 1158cm²
- Moving mass MMS 213g
- Moving mass (without air load) MMD 185g
- Material Carbone paper
Suspensions
- Stiffness KMS 10.8N/mm
- Compliance CMS 92.7µm/N
- Equivalent volume to the compliance VAS 160L
- Mechanical resistance RMS 5.18N·s/m
Dimensions
- Nominal diameter 18″
- 461mm
- Overall diameter 461mm
- Baffle cutout diameter 417mm
- Overall depth 223mm
- Volume occupied by the driver (estimated) 5.9L
- Net weight 8.95kg
- Frame material Die cast aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





