Oberton 18XB700
8Ω
Woofer
Nominal diameter | 18″ / 461 mm |
Resonance | 36.1 Hz |
Q factor | 0.30 |
Sensitivity | 95.6 dB |
Linear excursion | ± 9 mm |
Program Power | 2000 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.6dB
- Frequency response 35 - 1000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 36.1Hz
- Mechanical quality factor QMS 9.26
- Electrical quality factor QES 0.31
- Total quality factor QTS 0.30
Large signal parameters
- Maximum linear excursion xmax 9mm
- Air volume displaced at xmax VD 999cm³
- Power handling P 1000W
- Program power Pmax 2000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 1.83mH
- VC Diameter 100mm
- Winding height HVC 25mm
- Winding material Copper
- Former material Glass fiber
Magnet
- Flux density B 0.97T
- Force factor Bl 26.1N/A
- Motor constant Bl/√RE 11.5N/√W
- Air gap height HAG 14mm
- Material Ferrite
Diaphragm
- Effective diameter 376mm
- Effective area SD 1110cm²
- Moving mass MMS 183g
- Moving mass (without air load) MMD 156g
- Material Kevlar paper
Suspensions
- Stiffness KMS 9.4N/mm
- Compliance CMS 106µm/N
- Equivalent volume to the compliance VAS 183L
- Mechanical resistance RMS 4.47N·s/m
Dimensions
- Nominal diameter 18″
- 461mm
- Overall diameter 461mm
- Baffle cutout diameter 417mm
- Overall depth 203mm
- Volume occupied by the driver (estimated) 6.9L
- Net weight 12.55kg
- Frame material Die cast aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





