P.Audio 12BM-500B
8Ω
Low frequency
Nominal diameter | 12″ / 305 mm |
Resonance | 52 Hz |
Q factor | 0.35 |
Sensitivity | 95.9 dB |
Linear excursion | ± 4.8 mm |
Program Power | 1000 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.9dB
- Frequency response 50 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 52Hz
- Mechanical quality factor QMS 5.94
- Electrical quality factor QES 0.37
- Total quality factor QTS 0.35
Large signal parameters
- Maximum linear excursion xmax 4.8mm
- Air volume displaced at xmax VD 265cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 0.63mH
- VC Diameter 82.5mm
- Winding height HVC 19.6mm
- Winding material CCA-W
- Former material Glass fiber
Magnet
- Flux density B 1.1T
- Force factor Bl 16.6N/A
- Motor constant Bl/√RE 7.01N/√W
- Air gap height HAG 10mm
- Material Ferrite
Diaphragm
- Effective diameter 264mm
- Effective area SD 552cm²
- Moving mass MMS 56.1g
- Moving mass (without air load) MMD 47g
- Material Paper
Suspensions
- Stiffness KMS 6.17N/mm
- Compliance CMS 162µm/N
- Equivalent volume to the compliance VAS 69.8L
- Mechanical resistance RMS 3.09N·s/m
- Surround material Cloth
- Spider material Cotton (Single)
Dimensions
- Nominal diameter 12″
- 305mm
- Overall diameter 314mm
- Baffle cutout diameter 283mm
- Overall depth 148mm
- Flange thickness 18mm
- Mounting depth 130mm
- Volume occupied by the driver (estimated) 3.6L
- Net weight 9.2kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





