P.Audio 19FT-115XB
8Ω
Low frequency
Nominal diameter | 19″ / 483 mm |
Resonance | 42 Hz |
Q factor | 0.49 |
Sensitivity | 95.4 dB |
Linear excursion | ± 9 mm |
Program Power | 2400 W |
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.4dB
- Frequency response 40 - 1000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 42Hz
- Mechanical quality factor QMS 9.46
- Electrical quality factor QES 0.52
- Total quality factor QTS 0.49
Large signal parameters
- Maximum linear excursion xmax 9mm
- Air volume displaced at xmax VD 1400cm³
- Power handling P 1200W
- Program power Pmax 2400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.1Ω
- Inductance (1kHz) LE 0.96mH
- VC Diameter 114.4mm
- Winding height HVC 32mm
- Winding material EISVW
- Former material Glass fiber
Magnet
- Flux density B 1.2T
- Force factor Bl 27.6N/A
- Motor constant Bl/√RE 12.2N/√W
- Air gap height HAG 14mm
- Material Ferrite
Diaphragm
- Effective diameter 445mm
- Effective area SD 1555cm²
- Moving mass MMS 291g
- Moving mass (without air load) MMD 249g
- Material Waterproof Paper
Suspensions
- Stiffness KMS 20.8N/mm
- Compliance CMS 48µm/N
- Equivalent volume to the compliance VAS 165L
- Mechanical resistance RMS 8.11N·s/m
- Surround material Cloth
- Spider material Cotton (Double silicone)
Dimensions
- Nominal diameter 19″
- 483mm
- Overall diameter 512mm
- Baffle cutout diameter 472mm
- Overall depth 222mm
- Flange thickness 21mm
- Mounting depth 201mm
- Volume occupied by the driver (estimated) 10L
- Net weight 18.8kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





