P.Audio 19FT-125XB
FT
NTLow frequency
| Nominal diameter | 19″ / 483 mm |
| Resonance | 33 Hz |
| Q factor | 0.45 |
| Sensitivity | 94.7 dB |
| Linear excursion | ± 9.3 mm |
| Program Power | 3600 W |
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.7dB
- Frequency response 33 - 1000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 33Hz
- Mechanical quality factor QMS 10.30
- Electrical quality factor QES 0.47
- Total quality factor QTS 0.45
Large signal parameters
- Maximum linear excursion xmax 9.3mm
- Air volume displaced at xmax VD 1446cm³
- Power handling P 1800W
- Program power Pmax 3600W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.4Ω
- Inductance (1kHz) LE 1.26mH
- VC Diameter 127mm
- Winding height HVC 32.7mm
- Winding material Round Copper Wire
- Former material Glass Fiber
Magnet
- Flux density B 1.1T
- Force factor Bl 29.2N/A
- Motor constant Bl/√RE 12.6N/√W
- Air gap height HAG 14mm
- Material Ferrite
Diaphragm
- Effective diameter 445mm
- Effective area SD 1555cm²
- Moving mass MMS 324g
- Moving mass (without air load) MMD 278g
- Material Waterproof Paper
Suspensions
- Stiffness KMS 24.4N/mm
- Compliance CMS 41µm/N
- Equivalent volume to the compliance VAS 208L
- Mechanical resistance RMS 9.52N·s/m
- Surround material Cloth
- Spider material Double Silicone
Dimensions
- Nominal diameter 19″
- 483mm
- Overall diameter 512mm
- Baffle cutout diameter 472mm
- Overall depth 253mm
- Flange thickness 20mm
- Mounting depth 232mm
- Volume occupied by the driver (estimated) 13L
- Net weight 24.2kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)