P.Audio C15-400B v2
8Ω
Low frequency
| Nominal diameter | 15″ / 381 mm |
| Resonance | 42 Hz |
| Q factor | 0.55 |
| Sensitivity | 95.2 dB |
| Linear excursion | ± 3.3 mm |
| Program Power | 800 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.2dB
- Frequency response 55 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 42Hz
- Mechanical quality factor QMS 5.09
- Electrical quality factor QES 0.61
- Total quality factor QTS 0.55
Large signal parameters
- Maximum linear excursion (one way) xmax 3.3mm
- Air volume displaced at xmax VD 278cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.4Ω
- Inductance (1kHz) LE 0.35mH
- VC Diameter 75.7mm
- Winding height HVC 18.5mm
- Winding material AL-W
- Former material Glass fiber
Magnet
- Flux density B 1.1T
- Force factor Bl 15.6N/A
- Motor constant Bl/√RE 6.69N/√W
- Air gap height HAG 12mm
- Material Ferrite
Diaphragm
- Effective diameter 332mm
- Effective area SD 855cm²
- Moving mass MMS 103g
- Moving mass (without air load) MMD 85.6g
- Material Paper
Suspensions
- Stiffness KMS 7.3N/mm
- Compliance CMS 137µm/N
- Equivalent volume to the compliance VAS 142L
- Mechanical resistance RMS 5.4N·s/m
- Surround material Cloth
- Spider material Cotton (Single)
Dimensions
- Nominal diameter 15″
- 381mm
- Overall diameter 386mm
- Baffle cutout diameter 353mm
- Overall depth 184mm
- Flange thickness 16mm
- Mounting depth 168mm
- Volume occupied by the driver (estimated) 5L
- Net weight 10.1kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.png.webp)
.jpg.webp)
.jpg.webp)