P.Audio GST-12500 v3
8Ω
Low frequency
Nominal diameter | 12″ / 305 mm |
Resonance | 56 Hz |
Q factor | 0.48 |
Sensitivity | 94.3 dB |
Linear excursion | ± 3.3 mm |
Program Power | 1000 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.3dB
- Frequency response 50 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 56Hz
- Mechanical quality factor QMS 8.34
- Electrical quality factor QES 0.51
- Total quality factor QTS 0.48
Large signal parameters
- Maximum linear excursion xmax 3.3mm
- Air volume displaced at xmax VD 179cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.5Ω
- Inductance (1kHz) LE 0.52mH
- VC Diameter 76.2mm
- Winding height HVC 18.5mm
- Winding material Aluminum wire
- Former material Glass fiber
Magnet
- Flux density B 1.1T
- Force factor Bl 15.7N/A
- Motor constant Bl/√RE 6.69N/√W
- Air gap height HAG 12mm
- Material Ferrite
Diaphragm
- Effective diameter 266mm
- Effective area SD 552cm²
- Moving mass MMS 65.9g
- Moving mass (without air load) MMD 56.8g
- Material Waterproof Paper
Suspensions
- Stiffness KMS 8.13N/mm
- Compliance CMS 123µm/N
- Equivalent volume to the compliance VAS 52.9L
- Mechanical resistance RMS 2.78N·s/m
- Surround material Cloth
- Spider material Cotton
Dimensions
- Nominal diameter 12″
- 305mm
- Overall diameter 314mm
- Baffle cutout diameter 283mm
- Overall depth 159mm
- Flange thickness 17mm
- Mounting depth 142mm
- Volume occupied by the driver (estimated) 5.2L
- Net weight 15.2kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





