PHL audio 2440
8Ω
Mid Bass
| Nominal diameter | 8″ / 200 mm |
| Resonance | 77 Hz |
| Q factor | 0.31 |
| Sensitivity | 93.9 dB |
| Linear excursion | ± 5 mm |
| Program Power | 400 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.9dB
- Frequency response 80 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 77Hz
- Mechanical quality factor QMS 4.27
- Electrical quality factor QES 0.34
- Total quality factor QTS 0.31
Large signal parameters
- Maximum linear excursion xmax 5mm
- Maximum excursion before damage xlim 10mm
- Air volume displaced at xmax VD 110cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 0.746mH
- VC Diameter 51mm
- Winding height HVC 14mm
Magnet
- Force factor Bl 12.8N/A
- Motor constant Bl/√RE 5.61N/√W
- Air gap height HAG 8mm
- Diameter 158mm
- Material Ferrite
Diaphragm
- Effective diameter 167mm
- Effective area SD 219cm²
- Moving mass MMS 22g
- Moving mass (without air load) MMD 19.7g
Suspensions
- Stiffness KMS 5.26N/mm
- Compliance CMS 190µm/N
- Equivalent volume to the compliance VAS 13.1L
- Mechanical resistance RMS 2.49N·s/m
Dimensions
- Nominal diameter 8″
- 200mm
- Overall diameter 205mm
- Baffle cutout diameter 185mm
- Overall depth 100mm
- Flange thickness 10mm
- Mounting depth 90mm
- Volume occupied by the driver 1L
- Net weight 4.5kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.png.webp)
.png.webp)