PHL audio 2510
16Ω
Mid Bass
Nominal diameter | 8″ / 200 mm |
Resonance | 72 Hz |
Q factor | 0.24 |
Sensitivity | 94.3 dB |
Linear excursion | ± 4 mm |
Program Power | 500 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.3dB
- Frequency response 60 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 72Hz
- Mechanical quality factor QMS 4.52
- Electrical quality factor QES 0.25
- Total quality factor QTS 0.24
Large signal parameters
- Maximum linear excursion xmax 4mm
- Maximum excursion before damage xlim 12mm
- Air volume displaced at xmax VD 88cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 16Ω
- DC resistance RE 11.6Ω
- Inductance (1kHz) LE 2.42mH
- VC Diameter 51mm
- Winding height HVC 14mm
Magnet
- Force factor Bl 23N/A
- Motor constant Bl/√RE 6.75N/√W
- Air gap height HAG 8mm
- Diameter 158mm
- Material Ferrite
Diaphragm
- Effective diameter 167mm
- Effective area SD 219cm²
- Moving mass MMS 25g
- Moving mass (without air load) MMD 22.7g
Suspensions
- Stiffness KMS 5N/mm
- Compliance CMS 200µm/N
- Equivalent volume to the compliance VAS 13.3L
- Mechanical resistance RMS 2.5N·s/m
Dimensions
- Nominal diameter 8″
- 200mm
- Overall diameter 205mm
- Baffle cutout diameter 185mm
- Overall depth 100mm
- Flange thickness 10mm
- Mounting depth 90mm
- Volume occupied by the driver 1L
- Net weight 4.5kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





