PHL audio 2720
Woofer
8″ / 200 mm
Nominal diameter
50 Hz
Resonance
0.26
Q factor
93 dB
Sensitivity
± 9 mm
Linear excursion
700 W
Program Power
![PHL audio 2720 Woofer](/PHL/2720/PHL_2720_(Photo).jpg)
- Sensitivity (1W, 1m, infinite baffle)
- SPL1W
- 92.6
- dB
- Frequency response
- 40 - 3000
- Hz
- Resonance frequency (free air)
- fS
- 50.0
- Hz
- Mechanical quality factor
- QMS
- 3.76
- Electrical quality factor
- QES
- 0.27
- Total quality factor
- QTS
- 0.26
- Maximum linear excursion
- xmax
- 9.0
- mm
- Maximum excursion before damage
- xlim
- 19.0
- mm
- Air volume displaced at xmax
- VD
- 204
- cm³
- Power handling
- P
- 350
- W
- Program power
- Pmax
- 700
- W
- Nominal impedance
- Z
- 8
- Ω
- DC resistance
- RE
- 5.5
- Ω
- Inductance (1kHz)
- LE
- 1.11
- mH
- VC Diameter
- 51
- mm
- Winding height
- HVC
- 22
- mm
- Force factor
- Bl
- 12.6
- N/A
- Motor constant
- Bl/√RE
- 5.37
- N/√W
- Air gap height
- HAG
- 9
- mm
- Diameter
- 137
- mm
- Material
- Ferrite
- Effective diameter
- 170
- mm
- Effective area
- SD
- 227
- cm²
- Moving mass
- MMS
- 25
- g
- Moving mass (without air load)
- MMD
- 22.6
- g
- Stiffness
- KMS
- 2.5
- N/mm
- Compliance
- CMS
- 400
- µm/N
- Equivalent volume to the compliance
- VAS
- 29.2
- L
- Mechanical resistance
- RMS
- 2.09
- N·s/m
- Nominal diameter
- 8
- ″
- 200
- mm
- Overall diameter
- 204
- mm
- Baffle cutout diameter
- 185
- mm
- Overall depth
- 109
- mm
- Flange thickness
- 10
- mm
- Mounting depth
- 99
- mm
- Volume occupied by the driver
- 0.9
- L
- Net weight
- 3.65
- kg
Thiele & Small parameters
Large signal parameters
Voice Coil
Magnet
Diaphragm
Suspensions
Dimensions
![PHL audio 2720 SPL & Impedance](/PHL/2720/PHL_2720_(Frequency_response_+_Impedance).png)
![PHL audio 2720 Distortion](/PHL/2720/PHL_2720_(Distortion).png)
![PHL audio 2720 Force factor](/PHL/2720/PHL_2720_(Force_factor).png)
![PHL audio 2720 Inductance](/PHL/2720/PHL_2720_(Inductance).png)
![PHL audio 2720 Stiffness](/PHL/2720/PHL_2720_(Stiffness).png)
![PHL audio 2720 Dimensions](/PHL/2720/PHL_2720_(Dimensions).png)
Export this driver to a simulation software:
Closed Box Simulator·![WinISD](/images/export/WinISD.png)
![Basta!](/images/export/Basta.png)
![Hornresp](/images/export/Hornresp.png)
![QSpeakers](/images/export/QSpeakers.png)
![SpeakerSim](/images/export/SpeakerSim.png)
![MfbLabs](/images/export/MfbLabs.png)
![Speakerbench](/images/export/Speakerbench.png)