PHL audio 3002

• Sensitivity (1W, 1m, infinite baffle) SPL1W 90.6dB
• Frequency response 40 - 2500Hz

Thiele & Small parameters

• Resonance frequency (free air) fS 47Hz
• Mechanical quality factor QMS 6.42
• Electrical quality factor QES 0.41
• Total quality factor QTS 0.39

Large signal parameters

• Maximum linear excursion xmax 4.5mm
• Maximum excursion before damage xlim 13mm
• Air volume displaced at xmax VD 160cm³
• Power handling P 200W
• Program power Pmax 400W

Voice Coil

• Nominal impedance Z 8Ω
• DC resistance RE 5.4Ω
• Inductance (1kHz) LE 0.961mH
• VC Diameter 51mm
• Winding height HVC 13mm

Magnet

• Force factor Bl 15.9N/A
• Motor constant Bl/√RE 6.84N/√W
• Air gap height HAG 8mm
• Diameter 158mm
• Material Ferrite

Diaphragm

• Effective diameter 213mm
• Effective area SD 356cm²
• Moving mass MMS 65g
• Moving mass (without air load) MMD 60.2g

Suspensions

• Stiffness KMS 5.56N/mm
• Compliance CMS 180µm/N
• Equivalent volume to the compliance VAS 31.5L
• Mechanical resistance RMS 2.99N·s/m

Dimensions

• Nominal diameter 10″
• 250mm
• Overall diameter 255mm
• Baffle cutout diameter 229mm
• Overall depth 120mm
• Flange thickness 11mm
• Mounting depth 109mm
• Volume occupied by the driver 1.4L
• Net weight 5.0kg