PHL audio 3005NdU
8Ω
Subwoofer
| Nominal diameter | 10″ / 250 mm |
| Resonance | 53 Hz |
| Q factor | 0.46 |
| Sensitivity | 91.3 dB |
| Linear excursion | ± 9 mm |
| Program Power | 500 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 91.3dB
- Frequency response 40 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 53Hz
- Mechanical quality factor QMS 5.66
- Electrical quality factor QES 0.50
- Total quality factor QTS 0.46
Large signal parameters
- Maximum linear excursion (one way) xmax 9mm
- Maximum excursion before damage xlim 12mm
- Air volume displaced at xmax VD 320cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 4.7Ω
- Inductance (1kHz) LE 1.05mH
- VC Diameter 51mm
- Winding height HVC 22mm
Magnet
- Force factor Bl 12.6N/A
- Motor constant Bl/√RE 5.81N/√W
- Air gap height HAG 8mm
- Diameter 97mm
- Material Neodymium
Diaphragm
- Effective diameter 213mm
- Effective area SD 356cm²
- Moving mass MMS 51g
- Moving mass (without air load) MMD 46.2g
Suspensions
- Stiffness KMS 5.56N/mm
- Compliance CMS 180µm/N
- Equivalent volume to the compliance VAS 31.8L
- Mechanical resistance RMS 3N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 255mm
- Baffle cutout diameter 229mm
- Overall depth 122mm
- Flange thickness 11mm
- Mounting depth 111mm
- Volume occupied by the driver 1.4L
- Net weight 3.0kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.jpg.webp)