PHL audio 3820
Fe
NdUWoofer
Nominal diameter | 10″ / 250 mm |
Resonance | 55 Hz |
Q factor | 0.17 |
Sensitivity | 94.9 dB |
Linear excursion | ± 4.5 mm |
Program Power | 800 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.9dB
- Frequency response 50 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 55Hz
- Mechanical quality factor QMS 5.86
- Electrical quality factor QES 0.18
- Total quality factor QTS 0.17
Large signal parameters
- Maximum linear excursion xmax 4.5mm
- Maximum excursion before damage xlim 12mm
- Air volume displaced at xmax VD 160cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.1Ω
- Inductance (1kHz) LE 1.42mH
- VC Diameter 77mm
- Winding height HVC 17.5mm
Magnet
- Force factor Bl 24.5N/A
- Motor constant Bl/√RE 10.8N/√W
- Air gap height HAG 10mm
- Diameter 204mm
- Material Ferrite
Diaphragm
- Effective diameter 213mm
- Effective area SD 356cm²
- Moving mass MMS 61g
- Moving mass (without air load) MMD 56.2g
Suspensions
- Stiffness KMS 7.14N/mm
- Compliance CMS 140µm/N
- Equivalent volume to the compliance VAS 24.7L
- Mechanical resistance RMS 3.6N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 255mm
- Baffle cutout diameter 229mm
- Overall depth 124mm
- Flange thickness 11mm
- Mounting depth 113mm
- Volume occupied by the driver 2L
- Net weight 8.2kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





