PHL audio 4051
8Ω
Subwoofer
| Nominal diameter | 12″ / 300 mm |
| Resonance | 49 Hz |
| Q factor | 0.20 |
| Sensitivity | 97.7 dB |
| Linear excursion | ± 5 mm |
| Program Power | 600 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 97.7dB
- Frequency response 50 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 49Hz
- Mechanical quality factor QMS 3.27
- Electrical quality factor QES 0.21
- Total quality factor QTS 0.20
Large signal parameters
- Maximum linear excursion xmax 5mm
- Maximum excursion before damage xlim 16mm
- Air volume displaced at xmax VD 270cm³
- Power handling P 300W
- Program power Pmax 600W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.8Ω
- Inductance (1kHz) LE 1.13mH
- VC Diameter 77mm
- Winding height HVC 15mm
Magnet
- Force factor Bl 20.9N/A
- Motor constant Bl/√RE 8.68N/√W
- Air gap height HAG 10mm
- Diameter 204mm
- Material Ferrite
Diaphragm
- Effective diameter 262mm
- Effective area SD 539cm²
- Moving mass MMS 51g
- Moving mass (without air load) MMD 42.3g
Suspensions
- Stiffness KMS 4.76N/mm
- Compliance CMS 210µm/N
- Equivalent volume to the compliance VAS 85.2L
- Mechanical resistance RMS 4.8N·s/m
Dimensions
- Nominal diameter 12″
- 300mm
- Overall diameter 307mm
- Baffle cutout diameter 282mm
- Overall depth 142mm
- Flange thickness 13mm
- Mounting depth 129mm
- Volume occupied by the driver 2.7L
- Net weight 8.8kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.png.webp)
.jpg.webp)
.png.webp)