Nominal diameter | 12″ / 300 mm |
Resonance | 46 Hz |
Q factor | 0.18 |
Sensitivity | 96.2 dB |
Linear excursion | ± 6.5 mm |
Program Power | 800 W |
Driver
Port
Combined
Frequency response
Hz
Impedance
Ω
Impedance Phase
°
Excursion
mm
Velocity
m/s
SPL
dB
Acoustical Phase
°
Group Delay
ms
Transient response
ms
- Sensitivity (1W, 1m, infinite baffle) SPL1W 96.2dB
- Frequency response 50 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 46Hz
- Mechanical quality factor QMS 4.99
- Electrical quality factor QES 0.18
- Total quality factor QTS 0.18
Large signal parameters
- Maximum linear excursion xmax 6.5mm
- Maximum excursion before damage xlim 16mm
- Air volume displaced at xmax VD 320cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.0Ω
- Inductance (1kHz) LE 1.29mH
- VC Diameter 77mm
- Winding height HVC 17.5mm
Magnet
- Force factor Bl 23.3N/A
- Motor constant Bl/√RE 10.4N/√W
- Air gap height HAG 10mm
- Diameter 140mm
- Material Neodymium
Diaphragm
- Effective diameter 251mm
- Effective area SD 493cm²
- Moving mass MMS 69g
- Moving mass (without air load) MMD 61.1g
Suspensions
- Stiffness KMS 5.88N/mm
- Compliance CMS 170µm/N
- Equivalent volume to the compliance VAS 59.7L
- Mechanical resistance RMS 4N·s/m
Dimensions
- Nominal diameter 12″
- 300mm
- Overall diameter 307mm
- Baffle cutout diameter 282mm
- Overall depth 155mm
- Flange thickness 13mm
- Mounting depth 142mm
- Volume occupied by the driver 2.1L
- Net weight 6.5kg
Similar subwoofers to PHL audio 4071NdU-19
RCF MB12N4058 Ω |
---|
12″ Woofer |
fS | 52 Hz |
SD | 500 cm² |
50 - 2000 Hz |
QTS | 0.20 |
xmax | 7 mm |
SPL1W | 96 dB |
Bl/√RE | 10.5 |
Pmax | 2000 W |
B&C Speaker 12NW768 Ω |
---|
12″ Woofer |
fS | 40 Hz |
SD | 522 cm² |
40 - 2000 Hz |
QTS | 0.16 |
xmax | 8 mm |
SPL1W | 96.3 dB |
Bl/√RE | 11.1 |
Pmax | 1000 W |
SICA 12 F 4 CP8 Ω |
---|
12″ Woofer |
fS | 46 Hz |
SD | 531 cm² |
45 - 3000 Hz |
QTS | 0.20 |
xmax | 6 mm |
SPL1W | 95.3 dB |
Bl/√RE | 11.4 |
Pmax | 1400 W |