SICA 12 F 4 CP
8Ω
Woofer
Nominal diameter | 12″ / 321 mm |
Resonance | 46 Hz |
Q factor | 0.20 |
Sensitivity | 95.3 dB |
Linear excursion | ± 6 mm |
Program Power | 1400 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.3dB
- Frequency response 45 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 46Hz
- Mechanical quality factor QMS 6.24
- Electrical quality factor QES 0.21
- Total quality factor QTS 0.20
Large signal parameters
- Maximum linear excursion xmax 6mm
- Air volume displaced at xmax VD 319cm³
- Power handling P 700W
- Program power Pmax 1400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 1.33mH
- VC Diameter 100mm
- Winding height HVC 10mm
- Winding material Copper
- Former material Kapton
Magnet
- Flux density B 1.31T
- Force factor Bl 26N/A
- Motor constant Bl/√RE 11.4N/√W
- Weight 3.3kg
- Material Ferrite
Diaphragm
- Effective diameter 260mm
- Effective area SD 531cm²
- Moving mass MMS 92.1g
- Moving mass (without air load) MMD 83.2g
- Material Paper
Suspensions
- Stiffness KMS 7.69N/mm
- Compliance CMS 130µm/N
- Equivalent volume to the compliance VAS 52L
- Mechanical resistance RMS 4.27N·s/m
- Surround material Treated Cloth
Dimensions
- Nominal diameter 12″
- 321mm
- Overall diameter 320mm
- Baffle cutout diameter 284mm
- Overall depth 147mm
- Volume occupied by the driver (estimated) 4.2L
- Net weight 11.7kg
- Frame material Aluminium Die-Cast
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





