SICA 12 K 4 PL
8Ω
Woofer
Nominal diameter | 12″ / 321 mm |
Resonance | 48 Hz |
Q factor | 0.24 |
Sensitivity | 94.9 dB |
Linear excursion | ± 7 mm |
Program Power | 2000 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.9dB
- Frequency response 50 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 48Hz
- Mechanical quality factor QMS 4.41
- Electrical quality factor QES 0.25
- Total quality factor QTS 0.24
Large signal parameters
- Maximum linear excursion xmax 7mm
- Air volume displaced at xmax VD 372cm³
- Power handling P 1000W
- Program power Pmax 2000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 0.74mH
- VC Diameter 100mm
- Winding height HVC 12mm
- Winding material Copper
- Former material Kapton
Magnet
- Flux density B 1.1T
- Force factor Bl 24.7N/A
- Motor constant Bl/√RE 10.8N/√W
- Weight 0.536kg
- Material Neodymium
Diaphragm
- Effective diameter 260mm
- Effective area SD 531cm²
- Moving mass MMS 93.6g
- Moving mass (without air load) MMD 84.7g
- Material Paper
Suspensions
- Stiffness KMS 8.7N/mm
- Compliance CMS 115µm/N
- Equivalent volume to the compliance VAS 46.3L
- Mechanical resistance RMS 6.4N·s/m
- Surround material Treated Cloth
Dimensions
- Nominal diameter 12″
- 321mm
- Overall diameter 320mm
- Baffle cutout diameter 284mm
- Overall depth 155mm
- Volume occupied by the driver (estimated) 3L
- Net weight 6.6kg
- Frame material Aluminium Die-Cast
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





