PHL audio 5021M
8Ω
Subwoofer
| Nominal diameter | 15″ / 380 mm |
| Resonance | 32 Hz |
| Q factor | 0.30 |
| Sensitivity | 93.6 dB |
| Linear excursion | ± 7 mm |
| Program Power | 1000 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.6dB
- Frequency response 30 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 32Hz
- Mechanical quality factor QMS 4.15
- Electrical quality factor QES 0.32
- Total quality factor QTS 0.30
Large signal parameters
- Maximum linear excursion xmax 7mm
- Maximum excursion before damage xlim 16mm
- Air volume displaced at xmax VD 624cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 1.65mH
- VC Diameter 77mm
- Winding height HVC 20mm
Magnet
- Force factor Bl 24N/A
- Motor constant Bl/√RE 10.1N/√W
- Air gap height HAG 10mm
- Diameter 204mm
- Material Ferrite
Diaphragm
- Effective diameter 337mm
- Effective area SD 892cm²
- Moving mass MMS 165g
- Moving mass (without air load) MMD 147g
Suspensions
- Stiffness KMS 6.67N/mm
- Compliance CMS 150µm/N
- Equivalent volume to the compliance VAS 169L
- Mechanical resistance RMS 7.99N·s/m
Dimensions
- Nominal diameter 15″
- 380mm
- Overall diameter 381mm
- Baffle cutout diameter 356mm
- Overall depth 169mm
- Flange thickness 13mm
- Mounting depth 156mm
- Volume occupied by the driver 4.4L
- Net weight 7.7kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.png.webp)