PHL audio 6201MNd
8Ω
Subwoofer
Nominal diameter | 15″ / 380 mm |
Resonance | 36 Hz |
Q factor | 0.27 |
Sensitivity | 94.7 dB |
Linear excursion | ± 10.5 mm |
Program Power | 2000 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.7dB
- Frequency response 30 - 1000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 36Hz
- Mechanical quality factor QMS 5.22
- Electrical quality factor QES 0.29
- Total quality factor QTS 0.27
Large signal parameters
- Maximum linear excursion xmax 10.5mm
- Maximum excursion before damage xlim 19mm
- Air volume displaced at xmax VD 915cm³
- Power handling P 1000W
- Program power Pmax 2000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 1.62mH
- VC Diameter 101mm
- Winding height HVC 26mm
Magnet
- Force factor Bl 25N/A
- Motor constant Bl/√RE 10.9N/√W
- Air gap height HAG 10mm
- Diameter 140mm
- Material Neodymium
Diaphragm
- Effective diameter 333mm
- Effective area SD 871cm²
- Moving mass MMS 150g
- Moving mass (without air load) MMD 133g
Suspensions
- Stiffness KMS 7.69N/mm
- Compliance CMS 130µm/N
- Equivalent volume to the compliance VAS 140L
- Mechanical resistance RMS 6.5N·s/m
Dimensions
- Nominal diameter 15″
- 380mm
- Overall diameter 381mm
- Baffle cutout diameter 355mm
- Overall depth 186mm
- Flange thickness 13mm
- Mounting depth 173mm
- Volume occupied by the driver 4.2L
- Net weight 5.7kg
.png)
.png)
.png)
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





