PHL audio 970
Fe
NdCoaxial
| Nominal diameter | 5″ / 130 mm |
| Resonance | 67 Hz |
| Q factor | 0.36 |
| Sensitivity | 88.4 dB |
| Linear excursion | ± 6.5 mm |
| Program power | 240 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 88.4dB
- Frequency response 60 - 16000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 67Hz
- Mechanical quality factor QMS 3.75
- Electrical quality factor QES 0.40
- Total quality factor QTS 0.36
Large signal parameters
- Maximum linear excursion (one way) xmax 6.5mm
- Maximum excursion before damage xlim 12mm
- Air volume displaced at xmax VD 60cm³
- Power handling P 120W
- Program power Pmax 240W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.7Ω
- Inductance (1kHz) LE 0.346mH
- VC Diameter 38mm
- Winding height HVC 16mm
Magnet
- Force factor Bl 8N/A
- Motor constant Bl/√RE 3.35N/√W
- Air gap height HAG 6mm
- Material Ferrite
Diaphragm
- Effective diameter 108mm
- Effective area SD 92cm²
- Moving mass (including air load) MMS 10.7g
- Moving mass MMD 10g
Suspensions
- Stiffness KMS 1.89N/mm
- Compliance CMS 530µm/N
- Equivalent volume to the compliance VAS 6.2L
- Mechanical resistance RMS 1.2N·s/m
Dimensions
- Nominal diameter 5″
- 130mm
- Overall diameter 136mm
- Baffle cutout diameter 125mm
- Overall depth 88mm
- Flange thickness 12mm
- Mounting depth 76mm
- Volume occupied by the driver 0.18L
- Net weight 2.1kg
.png)
.png)
.png)
.png)
.png)
.png)
Export this driver to a box design software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.png.webp)
.jpg.webp)