PHL audio 973
Fe
NdCoaxial
Nominal diameter | 5″ / 130 mm |
Resonance | 67 Hz |
Q factor | 0.40 |
Sensitivity | 88 dB |
Linear excursion | ± 6.5 mm |
Program Power | 240 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 88dB
- Frequency response 60 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 67Hz
- Mechanical quality factor QMS 3.75
- Electrical quality factor QES 0.44
- Total quality factor QTS 0.40
Large signal parameters
- Maximum linear excursion xmax 6.5mm
- Maximum excursion before damage xlim 12mm
- Air volume displaced at xmax VD 60cm³
- Power handling P 120W
- Program power Pmax 240W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.7Ω
- Inductance (1kHz) LE 0.346mH
- VC Diameter 38mm
- Winding height HVC 16mm
Magnet
- Force factor Bl 7.6N/A
- Motor constant Bl/√RE 3.18N/√W
- Air gap height HAG 6mm
- Diameter 118mm
- Material Ferrite
Diaphragm
- Effective diameter 108mm
- Effective area SD 92cm²
- Moving mass MMS 10.7g
- Moving mass (without air load) MMD 10g
Suspensions
- Stiffness KMS 1.89N/mm
- Compliance CMS 530µm/N
- Equivalent volume to the compliance VAS 6.3L
- Mechanical resistance RMS 1.2N·s/m
Dimensions
- Nominal diameter 5″
- 130mm
- Overall diameter 136mm
- Baffle cutout diameter 125mm
- Overall depth 87mm
- Flange thickness 12mm
- Mounting depth 75mm
- Volume occupied by the driver 0.38L
- Net weight 2.08kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





