PRV Audio 10MR1003FT
8Ω
Mid-range
| Nominal diameter | 10″ / 265 mm |
| Resonance | 60.9 Hz |
| Q factor | 0.31 |
| Sensitivity | 96.1 dB |
| Linear excursion | ± 5.3 mm |
| Program Power | 1000 W |
Discontinued
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 96.1dB
- Frequency response 65 - 6000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 60.9Hz
- Mechanical quality factor QMS 22.04
- Electrical quality factor QES 0.32
- Total quality factor QTS 0.31
Large signal parameters
- Maximum linear excursion xmax 5.3mm
- Air volume displaced at xmax VD 213cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.7Ω
- Inductance (1kHz) LE 0.48mH
- VC Diameter 76.2mm
- Winding height HVC 14mm
- Winding material Copper
- Former material Glass Fiber
Magnet
- Force factor Bl 16.9N/A
- Motor constant Bl/√RE 7.08N/√W
- Air gap height HAG 7mm
- Material Ferrite
Diaphragm
- Effective diameter 227mm
- Effective area SD 405cm²
- Moving mass MMS 41.9g
- Moving mass (without air load) MMD 36.2g
Suspensions
- Stiffness KMS 6.14N/mm
- Compliance CMS 163µm/N
- Equivalent volume to the compliance VAS 37.4L
- Mechanical resistance RMS 0.73N·s/m
Dimensions
- Nominal diameter 10″
- 265mm
- Overall diameter 265mm
- Baffle cutout diameter 237mm
- Overall depth 132mm
- Flange thickness 11mm
- Mounting depth 121mm
- Volume occupied by the driver (estimated) 2.6L
- Net weight 7.55kg
- Frame material Die Cast Aluminum
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)