PRV Audio 10MR650A
4Ω
8Ω
Mid-range
Nominal diameter | 10″ / 254 mm |
Resonance | 64.7 Hz |
Q factor | 0.47 |
Sensitivity | 95.7 dB |
Linear excursion | ± 5.7 mm |
Program Power | 650 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.7dB
- Frequency response 80 - 6500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 64.7Hz
- Mechanical quality factor QMS 14.19
- Electrical quality factor QES 0.48
- Total quality factor QTS 0.47
Large signal parameters
- Maximum linear excursion xmax 5.7mm
- Air volume displaced at xmax VD 228cm³
- Power handling P 325W
- Program power Pmax 650W
- Peak power Ppeak 1300W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 0.44mH
- VC Diameter 68mm
- Winding height HVC 16.2mm
- Winding material Copper Clad Aluminium
- Former material Polyimide
Magnet
- Force factor Bl 12.3N/A
- Motor constant Bl/√RE 5.18N/√W
- Air gap height HAG 9.5mm
Diaphragm
- Effective diameter 225mm
- Effective area SD 398cm²
- Moving mass MMS 31.9g
- Moving mass (without air load) MMD 26.5g
Suspensions
- Stiffness KMS 5.26N/mm
- Compliance CMS 190µm/N
- Equivalent volume to the compliance VAS 41.9L
- Mechanical resistance RMS 0.91N·s/m
Dimensions
- Nominal diameter 10″
- 254mm
- Overall diameter 257mm
- Baffle cutout diameter 234mm
- Overall depth 108mm
- Flange thickness 9mm
- Mounting depth 99mm
- Volume occupied by the driver (estimated) 1.7L
- Net weight 4.7kg
- Frame material Stamped Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





