PRV Audio 6MR600X-NDY
4Ω
8Ω
Mid-range
Nominal diameter | 6″ / 152 mm |
Resonance | 95.2 Hz |
Q factor | 0.22 |
Sensitivity | 95.1 dB |
Linear excursion | ± 3.5 mm |
Program Power | 600 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.1dB
- Frequency response 90 - 13000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 95.2Hz
- Mechanical quality factor QMS 15.64
- Electrical quality factor QES 0.22
- Total quality factor QTS 0.22
Large signal parameters
- Maximum linear excursion xmax 3.5mm
- Air volume displaced at xmax VD 50cm³
- Power handling P 300W
- Program power Pmax 600W
- Peak power Ppeak 1200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.5Ω
- Inductance (1kHz) LE 0.023mH
- VC Diameter 50mm
- Winding height HVC 11mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 15.8N/A
- Motor constant Bl/√RE 6.21N/√W
- Air gap height HAG 8mm
Diaphragm
- Effective diameter 135mm
- Effective area SD 143cm²
- Moving mass MMS 15.8g
- Moving mass (without air load) MMD 14.6g
Suspensions
- Stiffness KMS 5.13N/mm
- Compliance CMS 195µm/N
- Equivalent volume to the compliance VAS 5.56L
- Mechanical resistance RMS 0.61N·s/m
Dimensions
- Nominal diameter 6″
- 152mm
- Overall diameter 165mm
- Baffle cutout diameter 143mm
- Overall depth 87mm
- Flange thickness 8mm
- Mounting depth 79mm
- Volume occupied by the driver (estimated) 0.65L
- Net weight 2.1kg
- Frame material Die Cast Aluminium
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





