Precision Devices PD.24603BR
8Ω
Subwoofer
| Nominal diameter | 24″ / 610 mm |
| Resonance | 34 Hz |
| Q factor | 0.31 |
| Sensitivity | 97.3 dB |
| Linear excursion | ± 16 mm |
| Program Power | 3600 W |
.png)
.png)
.png)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 97.3dB
- Frequency response 20 - 200Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 34Hz
- Mechanical quality factor QMS 9.92
- Electrical quality factor QES 0.32
- Total quality factor QTS 0.31
Large signal parameters
- Maximum linear excursion (one way) xmax 16mm
- Air volume displaced at xmax VD 3582cm³
- Power handling P 1800W
- Program power Pmax 3600W
- Peak power Ppeak 7200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 4.01mH
- VC Diameter 152mm
- Winding height HVC 37mm
- Winding material Copper
- Former material Glass Fibre
Magnet
- Flux density B 1.5T
- Force factor Bl 39.5N/A
- Motor constant Bl/√RE 17.1N/√W
- Air gap height HAG 15mm
- Diameter 194mm
- Material Neodymium
Diaphragm
- Effective diameter 534mm
- Effective area SD 2239cm²
- Moving mass MMS 440g
- Moving mass (without air load) MMD 366g
- Material Paper
Suspensions
- Stiffness KMS 20.1N/mm
- Compliance CMS 49.8µm/N
- Equivalent volume to the compliance VAS 355L
- Mechanical resistance RMS 9.48N·s/m
- Surround material Fabric
- Spider material Fabric
Dimensions
- Nominal diameter 24″
- 610mm
- Overall diameter 632mm
- Baffle cutout diameter 573mm
- Overall depth 277mm
- Flange thickness 17mm
- Mounting depth 260mm
- Volume occupied by the driver (estimated) 15L
- Net weight 23.0kg
- Frame material Vented Cast Aluminium
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.png.webp)
.png.webp)