SB Acoustics Satori MW16TX-8

• Sensitivity (1W, 1m, infinite baffle) SPL1W 87.2dB

Thiele & Small parameters

• Resonance frequency (free air) fS 29.3Hz
• Mechanical quality factor QMS 4.70
• Electrical quality factor QES 0.35
• Total quality factor QTS 0.33

Large signal parameters

• Maximum linear excursion xmax 6mm
• Air volume displaced at xmax VD 71cm³
• Power handling P 60W
• Program power Pmax 120W

Voice Coil

• Nominal impedance Z 8Ω
• DC resistance RE 6.2Ω
• Inductance (1kHz) LE 0.2mH
• VC Diameter 36mm
• Winding height HVC 17mm
• Winding material Copper Clad Aluminium
• Former material Glass Fiber

Magnet

• Flux density B 1.17T
• Force factor Bl 6.3N/A
• Motor constant Bl/√RE 2.53N/√W
• Air gap height HAG 5mm
• Weight 0.13kg
• Material Neodymium

Diaphragm

• Effective diameter 123mm
• Effective area SD 119cm²
• Moving mass MMS 12.3g
• Moving mass (without air load) MMD 11.3g
• Material TeXtreme®

Suspensions

• Stiffness KMS 0.417N/mm
• Compliance CMS 2400µm/N
• Equivalent volume to the compliance VAS 48L
• Mechanical resistance RMS 0.48N·s/m
• Surround material Rubber
• Spider material BIMAX

Dimensions

• Nominal diameter 6.5″
• 165mm
• Volume occupied by the driver (estimated) 0.4L
• Net weight 1.01kg
• Frame material Cast aluminium