SEAS H2009-04 ML15RCY/TP
4Ω
Mid-range
Nominal diameter | 5.5″ / 146 mm |
Resonance | 48 Hz |
Q factor | 0.32 |
Sensitivity | 86.9 dB |
Linear excursion | ± 3.4 mm |
Program Power | 200 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.9dB
- Frequency response 100 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 48Hz
- Mechanical quality factor QMS 3.53
- Electrical quality factor QES 0.35
- Total quality factor QTS 0.32
Large signal parameters
- Maximum linear excursion xmax 3.4mm
- Maximum excursion before damage xlim 10mm
- Air volume displaced at xmax VD 26cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.0Ω
- Inductance (1kHz) LE 0.24mH
- VC Diameter 25mm
- Winding height HVC 9.4mm
- Former material Titanium
Magnet
- Flux density B 1.3T
- Force factor Bl 4.8N/A
- Motor constant Bl/√RE 2.77N/√W
- Air gap height HAG 6mm
- Diameter 100mm
Diaphragm
- Effective diameter 98mm
- Effective area SD 75cm²
- Moving mass MMS 8.6g
- Moving mass (without air load) MMD 8.1g
- Material Anodized aluminium
Suspensions
- Stiffness KMS 0.8N/mm
- Compliance CMS 1250µm/N
- Equivalent volume to the compliance VAS 10L
- Mechanical resistance RMS 0.74N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 5.5″
- 146mm
- Overall diameter 146mm
- Baffle cutout diameter 105mm
- Overall depth 71mm
- Flange thickness 4mm
- Mounting depth 67mm
- Volume occupied by the driver (estimated) 0.41L
- Net weight 1.4kg
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





