SICA 10 K 3 PL
8Ω
Woofer
Nominal diameter | 10″ / 268 mm |
Resonance | 50.6 Hz |
Q factor | 0.26 |
Sensitivity | 94.4 dB |
Linear excursion | ± 6.5 mm |
Program Power | 800 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.4dB
- Frequency response 50 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 50.6Hz
- Mechanical quality factor QMS 5.02
- Electrical quality factor QES 0.27
- Total quality factor QTS 0.26
Large signal parameters
- Maximum linear excursion xmax 6.5mm
- Air volume displaced at xmax VD 225cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 0.49mH
- VC Diameter 75mm
- Winding height HVC 10mm
- Winding material Aluminium
- Former material Kapton
Magnet
- Flux density B 1.2T
- Force factor Bl 16.1N/A
- Motor constant Bl/√RE 7.04N/√W
- Weight 0.36kg
- Material Neodymium
Diaphragm
- Effective diameter 210mm
- Effective area SD 346cm²
- Moving mass MMS 42.1g
- Moving mass (without air load) MMD 37.3g
- Material Paper
Suspensions
- Stiffness KMS 4.26N/mm
- Compliance CMS 235µm/N
- Equivalent volume to the compliance VAS 40L
- Mechanical resistance RMS 2.67N·s/m
- Surround material Treated Cloth
Dimensions
- Nominal diameter 10″
- 268mm
- Overall diameter 268mm
- Baffle cutout diameter 232mm
- Overall depth 129mm
- Volume occupied by the driver (estimated) 1.4L
- Net weight 2.8kg
- Frame material Aluminium Die-Cast
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





