SICA 12 L1 2,5 SL
8Ω
Woofer
Nominal diameter | 12″ / 318 mm |
Resonance | 47.5 Hz |
Q factor | 0.36 |
Sensitivity | 94.9 dB |
Linear excursion | ± 3.7 mm |
Program Power | 600 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.9dB
- Frequency response 50 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 47.5Hz
- Mechanical quality factor QMS 7.50
- Electrical quality factor QES 0.38
- Total quality factor QTS 0.36
Large signal parameters
- Maximum linear excursion xmax 3.7mm
- Air volume displaced at xmax VD 182cm³
- Power handling P 300W
- Program power Pmax 600W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.5Ω
- Inductance (1kHz) LE 0.75mH
- VC Diameter 65mm
- Winding height HVC 8mm
- Winding material Copper
- Former material Kapton
Magnet
- Flux density B 1.15T
- Force factor Bl 14.2N/A
- Motor constant Bl/√RE 6.05N/√W
- Weight 0.22kg
- Material Neodymium
Diaphragm
- Effective diameter 250mm
- Effective area SD 491cm²
- Moving mass MMS 47g
- Moving mass (without air load) MMD 38.9g
- Material Paper
Suspensions
- Stiffness KMS 4.18N/mm
- Compliance CMS 239µm/N
- Equivalent volume to the compliance VAS 81.8L
- Mechanical resistance RMS 1.87N·s/m
- Surround material Treated Cloth
Dimensions
- Nominal diameter 12″
- 318mm
- Overall diameter 318mm
- Baffle cutout diameter 287mm
- Overall depth 130mm
- Volume occupied by the driver (estimated) 1.4L
- Net weight 2.3kg
- Frame material Pressed Sheet Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





