SICA 4 L 1 SL
8Ω
Woofer
Nominal diameter | 4″ / 102 mm |
Resonance | 108 Hz |
Q factor | 0.63 |
Sensitivity | 84.7 dB |
Linear excursion | ± 2.4 mm |
Program Power | 120 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 84.7dB
- Frequency response 110 - 10000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 108Hz
- Mechanical quality factor QMS 3.15
- Electrical quality factor QES 0.78
- Total quality factor QTS 0.63
Large signal parameters
- Maximum linear excursion xmax 2.4mm
- Air volume displaced at xmax VD 11cm³
- Power handling P 60W
- Program power Pmax 120W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.0Ω
- Inductance (1kHz) LE 0.37mH
- VC Diameter 25mm
- Winding height HVC 5mm
- Winding material Copper
- Former material Epotex
Magnet
- Flux density B 0.99T
- Force factor Bl 5.1N/A
- Motor constant Bl/√RE 2.08N/√W
- Weight 0.042kg
- Material Neodymium
Diaphragm
- Effective diameter 75mm
- Effective area SD 44.2cm²
- Moving mass MMS 5g
- Moving mass (without air load) MMD 4.8g
- Material Paper
Suspensions
- Stiffness KMS 2.32N/mm
- Compliance CMS 432µm/N
- Equivalent volume to the compliance VAS 1.2L
- Mechanical resistance RMS 1.08N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 4″
- 102mm
- Overall diameter 100mm
- Baffle cutout diameter 90mm
- Overall depth 47mm
- Volume occupied by the driver (estimated) 0.12L
- Net weight 0.2kg
- Frame material Pressed sheet steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





