SICA 5 F 1,5 CP
8Ω
Woofer
| Nominal diameter | 5″ / 132 mm |
| Resonance | 61 Hz |
| Q factor | 0.30 |
| Sensitivity | 88.4 dB |
| Linear excursion | ± 3.5 mm |
| Program Power | 200 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 88.4dB
- Frequency response 60 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 61Hz
- Mechanical quality factor QMS 4.23
- Electrical quality factor QES 0.33
- Total quality factor QTS 0.30
Large signal parameters
- Maximum linear excursion xmax 3.5mm
- Air volume displaced at xmax VD 28cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 0.48mH
- VC Diameter 38mm
- Winding height HVC 6mm
- Winding material Aluminium
- Former material Kapton
Magnet
- Flux density B 1.05T
- Force factor Bl 7.57N/A
- Motor constant Bl/√RE 3.2N/√W
- Weight 0.426kg
- Material Ferrite
Diaphragm
- Effective diameter 100mm
- Effective area SD 78.5cm²
- Moving mass MMS 8.7g
- Moving mass (without air load) MMD 8.2g
- Material Paper
Suspensions
- Stiffness KMS 1.28N/mm
- Compliance CMS 782µm/N
- Equivalent volume to the compliance VAS 6.8L
- Mechanical resistance RMS 0.79N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 5″
- 132mm
- Overall diameter 132mm
- Baffle cutout diameter 113mm
- Overall depth 66mm
- Volume occupied by the driver (estimated) 0.36L
- Net weight 1.4kg
- Frame material Aluminium Die-Cast
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.png.webp)
.png.webp)
.jpg.webp)