SICA 6 E 1,5 CS
8Ω
Woofer
Nominal diameter | 6″ / 164 mm |
Resonance | 60 Hz |
Q factor | 0.38 |
Sensitivity | 88.9 dB |
Linear excursion | ± 2.5 mm |
Program Power | 200 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 88.9dB
- Frequency response 60 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 60Hz
- Mechanical quality factor QMS 2.40
- Electrical quality factor QES 0.45
- Total quality factor QTS 0.38
Large signal parameters
- Maximum linear excursion xmax 2.5mm
- Air volume displaced at xmax VD 31cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.0Ω
- Inductance (1kHz) LE 0.61mH
- VC Diameter 38mm
- Winding height HVC 8mm
- Winding material Copper
- Former material Aluminium
Magnet
- Flux density B 1T
- Force factor Bl 7.5N/A
- Motor constant Bl/√RE 3.35N/√W
- Weight 0.426kg
- Material Ferrite
Diaphragm
- Effective diameter 125mm
- Effective area SD 123cm²
- Moving mass MMS 13.3g
- Moving mass (without air load) MMD 12.3g
- Material Paper
Suspensions
- Stiffness KMS 1.89N/mm
- Compliance CMS 529µm/N
- Equivalent volume to the compliance VAS 11.3L
- Mechanical resistance RMS 2.09N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 6″
- 164mm
- Overall diameter 166mm
- Baffle cutout diameter 142mm
- Overall depth 76mm
- Volume occupied by the driver (estimated) 0.48L
- Net weight 1.5kg
- Frame material Pressed sheet steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





