SUPRAVOX 135 LB
8Ω
Full-range
| Nominal diameter | 5.5″ / 135 mm |
| Resonance | 80 Hz |
| Q factor | 0.30 |
| Sensitivity | 95.6 dB |
| Linear excursion | ± 3 mm |
| Program Power | 70 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.6dB
- Frequency response 80 - 18000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 80Hz
- Mechanical quality factor QMS 3.60
- Electrical quality factor QES 0.30
- Total quality factor QTS 0.30
Large signal parameters
- Maximum linear excursion (one way) xmax 3mm
- Air volume displaced at xmax VD 26cm³
- Power handling P 35W
- Program power Pmax 70W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz, estimated) LE 0.25mH
Magnet
- Flux density B 1.4T
- Force factor Bl 5.4N/A
- Motor constant Bl/√RE 2.37N/√W
- Diameter 96mm
Diaphragm
- Effective diameter 105mm
- Effective area SD 86.5cm²
- Moving mass MMS 3.3g
- Moving mass (without air load) MMD 2.7g
Suspensions
- Stiffness KMS 1N/mm
- Compliance CMS 1000µm/N
- Equivalent volume to the compliance VAS 14L
- Mechanical resistance RMS 0.46N·s/m
- Surround material Paper
Dimensions
- Nominal diameter 5.5″
- 135mm
- Overall diameter 134mm
- Baffle cutout diameter 122mm
- Overall depth 80mm
- Flange thickness 5mm
- Mounting depth 75mm
- Volume occupied by the driver (estimated) 0.36L
- Frame material Sheet
.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.jpg.webp)