SUPRAVOX 165-2000
4Ω
Full-range
| Nominal diameter | 6.5″ / 165 mm |
| Resonance | 70 Hz |
| Q factor | 0.78 |
| Sensitivity | 95.4 dB |
| Linear excursion | ± 5 mm |
| Program Power | 70 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.4dB
- Frequency response 60 - 20000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 70Hz
- Mechanical quality factor QMS 6.00
- Electrical quality factor QES 0.90
- Total quality factor QTS 0.78
Large signal parameters
- Maximum linear excursion (one way) xmax 5mm
- Air volume displaced at xmax VD 83cm³
- Power handling P 35W
- Program power Pmax 70W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 4.1Ω
- Inductance (1kHz, estimated) LE 0.26mH
Magnet
- Flux density B 2T
- Force factor Bl 3.2N/A
- Motor constant Bl/√RE 1.58N/√W
- Weight 1.2kg
- Material Alnico
Diaphragm
- Effective diameter 145mm
- Effective area SD 165cm²
- Moving mass MMS 4.9g
- Moving mass (without air load) MMD 3.3g
Suspensions
- Stiffness KMS 0.909N/mm
- Compliance CMS 1100µm/N
- Equivalent volume to the compliance VAS 40L
- Mechanical resistance RMS 0.36N·s/m
- Surround material Paper
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 185mm
- Baffle cutout diameter 160mm
- Overall depth 95mm
- Flange thickness 10mm
- Mounting depth 85mm
- Volume occupied by the driver (estimated) 0.7L
- Frame material Aluminium
.gif)
.gif)
.gif)
.gif)
.gif)
.gif)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.webp.webp)
.jpg.webp)