Scan-Speak Revelator 15W/4531G00
4Ω
Mid Bass
Nominal diameter | 6″ / 150 mm |
Resonance | 40 Hz |
Q factor | 0.32 |
Sensitivity | 86.3 dB |
Linear excursion | ± 6.5 mm |
Program Power | 180 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.3dB
- Frequency response 40 - 6000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 40Hz
- Mechanical quality factor QMS 4.60
- Electrical quality factor QES 0.34
- Total quality factor QTS 0.32
Large signal parameters
- Maximum linear excursion xmax 6.5mm
- Maximum excursion before damage xlim 9mm
- Air volume displaced at xmax VD 62cm³
- Power handling P 60W
- Program power Pmax 180W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.4Ω
- Inductance (1kHz, estimated) LE 0.42mH
- VC Diameter 38mm
- Winding height HVC 17.5mm
Magnet
- Force factor Bl 5.7N/A
- Motor constant Bl/√RE 3.09N/√W
- Air gap height HAG 5mm
- Material Ferrite
Diaphragm
- Effective diameter 110mm
- Effective area SD 95cm²
- Moving mass MMS 13g
- Moving mass (without air load) MMD 12.3g
- Material Sliced
Suspensions
- Stiffness KMS 0.8N/mm
- Compliance CMS 1250µm/N
- Equivalent volume to the compliance VAS 15.8L
- Mechanical resistance RMS 0.7N·s/m
- Surround material SBR Rubber
Dimensions
- Nominal diameter 6″
- 150mm
- Volume occupied by the driver 0.36L
- Net weight 1.7kg
- Frame material Die cast Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





